1. Select a Material

PEEK Materials

View Data Table for PEEK Materials
- - - Ketron PEEK Victrex PEEK 450G Ketron PEEK 30% Glass-filled Ketron PEEK 30% Glass-filled Ketron PEEK Victrex PEEK 450GL30 30% Carbon-filled Ketron PEEK 30% Carbon-filled Ketron PEEK Victrex PEEK 450CA30 Ketron PEEK HPV Victrex PEEK Optima LT
MECHANICAL Units ASTM Test Method Compression Molded Polyetheretherketone Injection Molded Polyetheretherketone Extruded Polyetheretherketone Compression Molded 30% GF PEEK Extruded 30% GF PEEK- Injection Molded 30% GF PEEK Compression Molded 30% CF PEEK Extruded 30% Carbon-filled PEEK Injection Molded 30% CF PEEK Bearing Grade Polyetheretherketone Injection Molded Polyetheretherketone
Strength to Weight Ratio ksi - - - - - - - - - - - -
Specific Gravity @73 F - D792 1.32 1.30 1.31 1.45 1.54 1.50 1.42 1.41 1.41 1.44 1.30
Tensile Strength @73 F, (ult)/(yld) psi D638 15000 (ult) 14100 (ult) 16000 (ult) 17000 (ult) 18000 (ult) 22620 (ult) 20000 (ult) 23200 (ult) 33785 (ult) 17400 14100 (ult)
Tensile Modulus of Elasticity @ 73 F psi D638 450000 522000 500000 750000 1000000 1407000 800000 1400000 1885000 1100000 522000
Tensile Elongation at Break @ 73 F % D638 1.0 5 20 3 3 2.0 2.0 3 2 3 5
Flexural Strength @ 73 F psi D790 25000 24650 2500 28000 28000 33785 30000 - 51475 - 24650
Flexural Modulus of Elasticity @ 73 F psi D790 600000 594500 600000 1000000 1000000 1450000 1300000 - 2929000 - 594500
Shear Strength @ 73 F psi D732 - 7685 (ult) 8000 - 14000 14065 (ult) - - 14065 (ult) - 7685 (10)
Compressive Strength, (% Deformation) @73 F psi D695 17000 (10) 17255 (10) 20000 (10) 19000 (10) 26000 (10) 31175 (10) 25000 (10) 29000 (10) 34800 (10) 21800 (10) 17255 (10)
Compressive Modulus of Elasticity @73 F psi D695 450000 - 500000 500000 1000000 - 550000 - - - -
Hardness, Rockwell, Scale as noted @73 F - D785 M99 (R126) M99 (R126) M100 (R126) M103 (R124) M103 (R126) M103 (R124) M97 (R125) M104 M107 (R124) M99 M99 (R126)
Hardness, Durometer, Shore D @73 F - D2240 D85 - D85 D86 D86 - D86 - - - -
Izod Impact, (Notched) @73 F ft-lb/in of notch D256 TypeA 1.0 1.6 1.0 1.4 1.4 1.8 1.4 1.0 1.6 0.7 1.6
Coefficient of Friction, (Dry vs. Steel) Dynamic - - 0.4 - 0.40 - - - 0.19 - - 0.24 -
Limiting PV, (with 4 to 1 factor of safety applied) psi-ft/min - 12500 - 5500 - - - 25000 25000 - 13000 -
THERMAL
Coefficient of Linear Thermal Expansion @73 F in/in/F E-831 (TMA) 2.6E-05 2.6E-05 2.6E-05 1.4E-05 1.2E-05 1.2E-05 1.7E-05 1.0E-05 8.0E-06 1.4E-05 2.6E-05
Heat Deflection Temperature @ 264 psi F D648 320 306 320 600 600 600 600 518 600 446 306
Tg-Glass transition temperature, (Amorphous) F D3418 - 289 - - - 289 - 289 289 289 289
Melting Point, (VS=Vicat Softening Temp.) F D3418 644 644 644 644 644 644 644 644 644 644 644
Continuous Service Temperature in Air, (Max.) F - 480 480 480 480 480 480 480 593 480 482 480
Thermal Conductivity BTU-in/hr-ft2-F - 1.75 1.75 1.75 2.98 2.98 2.98 6.37 6.40 6.37 1.70 1.75
ELECTRICAL
Dielectric Strength, Short Term Volts/mil D149 480 480 480 500 500 500 - 32 - - 480
Volume Resistivity ohm-cm D257 4.9E+16 4.9E+16 4.9E+16 5.0E+16 5.0E+16 1.0E+16 - 1.0E+06 1.4E+05 <1E8 4.9E+16
Dielectric Constant @ 10E6 Hz - D150
3.3
 3.3 3.3 - - 3.7 - - - - 3.3
Dissipation Factor @ 10E6 Hz - D150 0.003 0.003 0.003 - - 0.004 - - - - 0.003
Flammability @ 3.1 mm unless noted - UL94 V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0
H2O
Water Absorbtion, Immersion, 24 Hrs % by wt. D570(7) 0.15 0.50 0.10 0.15 0.10 0.11 0.15 0.06 0.06 0.05 0.50
Water Absorbtion, Saturation % by wt. D570(7) 0.50 0.50 0.50 0.50 0.30 - 0.50 0.30 - 0.30 0.50

CCT utilizes many different types of CNC equipment to produce parts for our customers. We have four CNC-controlled multi-spindled routers, five CNC controlled vertical machining centers, and one large format router. Our goal is to keep our personnel supplied with the equipment they need to produce parts to the most exacting tolerances.

Request a Quote Today

We're prepared to handle even the most challenging custom plastic machining project. Contact us today and let us deliver your project on spec and on time.

 

CNC Plastic Machining

We are Custom Cutting Technologies, Inc. Founded in 1999, we are a machine shop specializing in plastic materials. We operate several different types of CNC controlled equipment to maximize the services we can offer.

Our multi-head CNC routers are capable of efficiently and accurately machining parts from sheet stock. By running multiple parts under multiple heads, we can achieve part costs that you would expect from die cutting with quality that you would expect from machining or water jet cutting.

ISO 9001:2000 certified.

Browse by Material

CCT Plastics is experienced with a wide range of materials that other shops won’t let in the door. Not only can we manufacture your part, but we’ll perform the work at a tolerance that would make our competitors shake their head in disbelief.

Browse by Part

CCT utilizes a wide range of flat plastic or non-metal materials and a wide range of tolerances. CCT can meet the most stringent military specification or match the most intricate print for a decorative consumer product.

Request a Quote

Have a project in your hands and need a reliable machining partner to execute it?

Call Toll Free
866.459.2564